5374 Impact Validation Slip Printer
Slip Printing Made Simple
Featuring:
- USB 2.0 and RS232 serial interfaces standard on every printer.
- Easily configured to work with most teller software solutions.
- Form validation of up to 14 printed lines.
- Configurable form height.
- Optional Right Side Guide
- LEDs indicate modes of operation, paper present, and printer status.
- Small footprint.
Print slips fast and quiet with this easy to use validation slip printer. Highly configurable, this printer is a great replacement for older slip
printers. When roll paper is not required the 5374 is a great low total cost of ownership (TCO) solution.
With USB Virtual COM capabilities, this printer can work with older software applications without the need for a PC with RS232 COM ports.
5374 Impact Validation Slip Printer
Specifications
| Form Compatibility | Original + 2 Copies (Multi-Ply), 5.5" x 2.75" Min. (139.7mm x 69.9mm) |
| Thickness | 0.0015" to 0.0047" Multi-Ply (0.0381mm - 0.1194mm) |
| Total Media Thickness | 0.012" (0.305mm) |
| Impact Ribbon | |
| Black | 3 Million Characters, Part #: 100629-011 (6-Pack) |
| Purple | 4 Million Characters, Part #: 100629-012 (6-Pack) |
| Communications Interfaces | |
| Serial | RS-232C (DB9M) Baud Rates up to 57.6K |
| USB | 2.0 Compatible (Supports VirtualCOM mode) |
| Cash Drawer (5351 Only) | One 6-pin Female Tele-Connector (RJ-12) |
| 2 Drawer Capability / Single Sense | |
| Print Speed | 4.7 LPS (Lines/Second) @ 40 CPL (Characters/Line), 16 CPI (Characters/Inch) and 6 LPI (Lines/Inch) |
| Paper Feed | 5 IPS (Inches/Second) |
| Printhead | 9-Wire Impact Dot Matrix |
| Line Pitch | 5, 6, 7, 8 LPI |
| Character Sets | USA |
| Code Pages | 437 USA, 863 Canadian-French, and 1252 Latin I |
| Fonts | Multiple Fonts Available |
| Graphics | Full 9-Wire |
| Print Line | 2.5" Wide Validation, 72x80 DPI Draft Mode, 72x160 DPI Standard Mode |
| Validation | Up to 14 Lines on Inserted Form at 8 LPI |
| Compatibility Modes | Two |
| Footprint | |
| Width | 6.9" (175mm) |
| Length | 7" (178mm) |
| Height | 4.5" (114mm) |
| Weight | 5.75 lbs (2.61kg) |
| Power Supply | Locking Connector, 60 Watt, 24V Brick |
| Power Supply Weight | 1.12 lbs Max. (0.051kg) |
| Environmental | |
| Noise | 60 db |
| Operating Temperature | 10° to 40°C, Humidity 10-90% Non-Condensing |
| Storage Temperature | -10° to 40°C, Humidity 10-90% Non-Condensing |
| Life Expectancy | |
| Printhead | 300 Million Impacts Per Wire |
| PCB | 61K hrs |
| Mechanism | 9.5 Million Printed Lines; 630K Validations |
| Agency Listings | FCC Class B, C TUV CUE, RoHS |
| Drivers | |
| PCL Print Driver | Windows 10, 7 Certified Driver |
| VirtualCOM Driver | Windows 10, 7 Certified Driver |
Tags:
We are driven by a philosophy that believes that there are NO FRONTIERS, only horizons.